PLAYSTEM Voyager 400 RC Controlled Wind Powered Sailboat in Blue – 26″ Tall

Price: $139.99 - $129.99
(as of Dec 23, 2024 04:41:04 UTC – Details)

Product Description

Voyager 400 Sailboat

Sail the Seas with the PlaySTEAM Voyager 400!

Learn about sailing with the PlaySTEAM Voyager 400 Sailboat. With no assembly required, this product is easy to use without hassle. Choose from 2 different colors-blue and red. Complete with a transmitter, control the sail angle and water rudder.

Control your own sailboat!

Complete with a 2-channel transmitter, control the sail angle and water rudder.

Ready to Run!

With no assembly required, this product is easy to use, without the hassle.

Fun for all!

Control your boat with the included transmitter and race against others for a fun outdoor activity.

VOYAGER 400 SAILBOAT – FREQUENTLY ASK QUESTIONS

Q: Is this boat powered by an electric motor?

No, the Voyager 400 is an unmotorized sailboat, powered only by wind. The Voyager 400 includes a battery-powered two-channel radio-controlled transmitter that controls the rudder and sails. You use the rudder to turn the boat. You use the sail control to move the sail angle in and out to take advantage of the wind based on wind direction and speed.

Q: Is this driven by a motor?

No, there is no motor. The Voyager 400 is powered by wind in the sails and controlled by RC which manipulates the sails and the rudder.

Q: How tall is this boat?

The Voyager 400 is 26.5-inches (672mm) tall, from bottom of keel to top of the mast. The Voyager 400 rises 21 inches above the water surface.

Q: How wide is this boat?

The Voyager 400 is 4-inches (100mm) wide.

Q: How fast does the Voyager go?

This all depends on the winds. But we don’t recommend using in a gusty breeze or a heavy winds above 15 mph.

Q: Can these be used in saltwater?

Should be okay, except it is not designed for use in any significant waves or winds.

Q: Is the Voyager 400 radio controlled?

Yes, the Voyager 400 is controlled by two servos. One for the rudder and the other for the sail angle to catch the wind.

Q: What is required?

Four AA batteries for the transmitter and you will need light winds or a slight breeze.

Q: Is the Voyager 400 fully assembled?

Yes, the Voyager 400 is RTR (Ready To Run). The only thing you need to do is install four AA alkaline batteries in the transmitter and charge the included LiPo battery located in the boat. That LiPo battery powers the radio control receiver and the servos located inside the boat.

Q: How is the LiPo battery charged?

This is done by connecting the battery to a port in the back of the transmitter. Typically takes 15 minutes to charge.

Q: What is the frequency used? Is a license required?

2.4Ghz. No license is required.

Q: How do I open the hatch to get inside the boat?

Find the “table” on the deck and turn that 90 degrees to release the latch holding the hatch down to the deck of the boat.

Control your own RC sailboat – 2-channels with two servos for control of the water rudder and sail angle.
Powered by the wind! Does not need (or include) a motor for forward movement. Captain your sailboat and learn about wind powered control.
No assembly required. Perfect for the pool or pond.
Requires: 4 AA batteries and wind. 26.5” tall (21” above the waterline) and 15.75” long.
If there are problems such as Mainsail is not attached, missing parts, broken parts, please contact us in time, we will replace you with new products for free, and we are happy to solve any product problems for you until you are satisfied.